Thank you for choosing us for your new sail. This simple guide is meant to help you in fitting and tensioning its battens correctly, to make the most out of your sail and preserve its integrity for a long time. Please read carefully before installing the sail, and remember that your One Sails dealer is just a phone call away if you need assistance!
Elastic tensioner (rear loading)
“Rocket” tensioner (rear loading)
Velcro tensioner (rear loading).
Velcro tensioner (front loading)
A. gently insert the batten’s soft end in the pocket, then slide at the leech
B. push the batten all the way in until it engages the elastic tensioner at the inboard edge
C. push the batten end past the pocket slot, and let it return and insert in the pocket’s leech end
A. gently insert the batten’s soft end in the pocket, then slide the black plastic tensioner onto its end as shown
B. push the batten all the way in
C. engage the retainer line integrated in the pocket around the tensioner end as shown
D. using a flathead screwdriver tension the batten until it just sits firmly in its pocket
A. gently insert the batten’s soft end in the pocket, above the velcro flap
B. push the batten all the way in, then feed the end of the velcro flap into the pocket
C. gently pointing the end of the batten feeder into the flap’s recess, push the flap fully in until the batten sits firmly inside its pocket.
D. leave the line loop from the velcro flap outside, to be grabbed for extraction
A. gently insert the batten’s hard end in the pocket, above the velcro flap
B. push the batten all the way in
C. fold the velcro flap over the batten tip, then pull tight and press down to secure
D. close the pocket protective cover and press down firmly
N.B. Not all the fittings and accessories depicted in this guide could be part of the standard dotation of the sail.
Meld deg på vårt nyhetsbrev for å få oppdateringer, informasjon, nyheter, innsikt eller kampanjer:
