The OneSails group has a shared passion for sailing and the sea. Respect for the environment keeps us focused on how we can continually improve the sustainability of our sails.
Our commitment to reducing the carbon footprint of our sails is centred on the materials and what happens to a sail at the end of its life. In 2015, OneSails launched 4T FORTE ™ sails and membranes recycling process. Awarded ISO 14040 Life Cycle Assessment Certification, 4T FORTE ™ are the only fully recyclable membranes on the market today.
Membranes and their assembly have been engineered for highest standards in terms of environmental impact and recyclable options. Glues, resins and solvents have been replaced by heat fusion and the base polymer is 100% recyclable in a standard waste separation process.
Holds to the highest standards of environmental practices and the responsible sourcing of materials and energy sources.
Sails made of 4T FORTE are produced with a low level of CO2 emissions into the atmosphere and without the use of pollutants such as glues, resins and solvents.
At the end of their useful life, these sails are recycled within the normal recovery processes of polyethylene-based raw materials to generate the PE pellet.
The polyethylene pellet is used for the production of accessories (such as headboards) to be used in the production of new sails.
For the first time ever!
Over 10 years of research and development have led to the creation of sails that win in regattas, last over time, have low CO2 emissions during production and can be recycled at the end of their life.
From this idea were born the MARKERS deriving from the sails used in the Vendée Globe by Pip Hare made by @carioca_italia
We strongly believe in sustainability. Our commitment is concrete and certified according to: ISO 14021:2021 and ISO 14001:2015 by independent auditors (IQNet).
4T Forte™ technology, developed by FLEXON for OneSails, is used for cruising, sport and commercial sails. Each membrane is unique but uses the same materials in different quantities. The materials are PE-based (HDPE, LDPE, PE, PET, UHMWPE) in varying proportions.
These membranes are an important innovation in today’s market, where the most commonly used material is Dacron. This material is durable, UV-resistant and economical, but not suitable for high-performance sails. For this reason, materials such as Pentex®, Kevlar®, Carbon, Dyneema® and Vectran® are used instead.
Flexon uses the ISO/TS 14067/2018 standard to calculate the carbon footprint, and improve energy efficiency. A spreadsheet dynamically evaluates the emissions of materials and processes.
Compared to others, OneSails 4T Forte™ membranes:
Flexon Composites fabricates the 4T FORTE™ membrane, designed to be recovered at the end of its life. The membrane is shipped to sailmakers for finishing.
The process of making a sail includes:
At the end of use, accessories are removed to allow recycling. Membrane collection and disassembly are handled by the OneSails network in cooperation with Flexon and PoliEco, which offer the possibility of properly preparing membranes for recycling into reusable PE granules.
To prepare the membrane for recycling, the Loft, following instructions for the effective separation of components provided by Flexon, must:
Recycling will produce PE granules that can be reused in the plastics industry. Recovery depends on the presence of collection networks and recycling plants. Without them, Flexon and OneSails can handle the collection and sending to European plants.
OneSails can deliver 4T FORTE™ main sails with integrated thin cell PV panels, which regenerate the yacht’s batteries using solar energy.
Due to the high modulus construction of the 4T FORTE™ composite material, the impact of the PV panels is minimal in terms of the sail’s characteristics and performance.
For example, the Spirit 44CR(e) is a fully electric yacht designed and built by Spirit Yachts. To fit with the owner’s brief of ‘near total self-sufficiency’, OneSails worked closely with Spirit Yachts and Solar Cloth to integrate solar panels into the 4T FORTE recyclable mainsail. The three panels on each side of the sail have the capacity to regenerate 560watts, or 1,120watts total for both sides of the sail. Solar panel technology is always improving and OneSails is continually testing and developing new solutions.
I over 15 år har OneSails-designteamet utviklet eksklusive teknologier for å lage seil i ett stykke med kontinuerlig tråder for tur- og regattabåter.
Egenskaper som vekt, lett å trimme og høy bruddstyrke gir bedre ytelse sammenlignet med tradisjonelle panelseil.
Seilene er designet og produsert i henhold til de strengese krav og består av nøye utvalgte komponenter for å sikre høyeste kvalitet og holdbarhet. 4T FORTE™-membranene er kun laget i Italia. Hele produksjonsprosessen foregår i en spesialfabrikk som sikrer at alle nødvendige standarder oppfylles.
De beste seildesignene er et resultat av kontinuerlig analyse og erfaring. OneSails ligger i forkant i seilmakerbransjen og investerer kontinuerlig i forskning og utvikling for å sikre at vi har de aller beste designene. At denne metoden er vellykket, bevises av det store antallet titler som OneSails sine kunder har vunnet i nasjonale, internasjonale og verdensmesterskap.
En kjerneaktivitet for alle OneSails Loft er å tilby førsteklasses service, støtte og oppfølging. Som en del av vår serviceforpliktelse har hvert OneSails seilloft et team av eksperter som sørger for at vi kan innfri serviceløftet vårt. I tillegg til et økende antall hovedloft har OneSails Gruppen har et omfattende nettverk av serviceloft som er strategisk plassert langs hele verdens kystlinje.
Meld deg på vårt nyhetsbrev for å få oppdateringer, informasjon, nyheter, innsikt eller kampanjer:
YOU WILL RECEIVE AN E-MAIL SOON WITH THE LINK TO DOWNLOAD THE SUSTAINABLE BROCHURE.
YOU WILL SOON RECEIVE AN E-MAIL WITH THE LINK TO DOWNLOAD THE CERTIFICATE OF SUSTAINABILITY.
